20-03584 Manufactured Home in a Park
3060 NE McWilliams Rd
Bremerton,  WA  98311
Parcel #: 9000-001-150-0007
Status: Permit has been issued to applicant.
Submitted: 8/10/2020
Approved: 10/13/2020
Issued: 10/14/2020
Expires: 10/14/2021
Required: 6
Complete: 6
Total Fees:
Additional fees may be required
Project: STRINGER - Lot #22 Replace Manufactured Home

Public Notice
Description Begin Date End Date


License #: BAYVICI912B3

Impact Fee Land Category:
Impact Fee Units:

Parcel(s) associated with your permit.
Parcel Owner Address
UNKNOWN,  WA 00000


Upload documents in PDF format on the following screen. The name of each file should simply identify what each submittal document is. Examples: “Floor Plans”, “Engineered Structural Plans”, "Engineered Civil Plans", “Site Plan”

Click the files link on the far right of the submittal item to upload. The files link will indicate how many documents have been uploaded.

Not uploading all required submittal documents will delay the processing of your permit.

Submittal Required Received Accepted
Upload Required Permit Documents as listed on your Required Permit Questionnaire at Yes 10/5/2020 10/9/2020
Please upload the Vehicle Identification Number (VIN) for the mobile or manufactured home prior to requesting a final inspection. Yes

Approval Steps
Follow your application through the approval process.
Step Status Date
Application has been submitted and is pending acceptance Approved 10/9/2020
Permit Center Processing - Building Approved 10/12/2020
Health District Approval Processing for Building Permits Approval Step Not Required (Deleted) 10/13/2020

Start Complete Applicant Response
10/12/2020 10/13/2020

Fixture Quantity Per Unit Value
Total: $0.00


Valuations and fees will be validated during the review process.

Valuation Quantity Rate Value
Total: $0.00


Fee totals below may not reflect all fees, including fees calculated by hourly rates.

Fee Amount
Technology Fee $3.90
Permit Center Base Fee $90.00
Manufactured Home in a Park $130.00
Total : $223.90

Type Number Amount Issued Expires Completed


The inspections listed below are standard for all permits of this type and may not apply to your specific permit. Once your permit has been issued, all inspections listed are applicable to your permit. Note: Community Development Building Final Inspections (B-Final), Commercial CO Inspection Fire Marshal (FM-CO-Final) and the Final Field Inspections (DE-FFI) are not eligible for next day inspection requests. Please allow two business days when requesting a Final inspection.

Completed On
Residential Temporary Silt & Erosion Control Inspection.*Note: This is not a standalone inspection, it will be done with all building inspections and will not be approved until final inspection. You will not need to request this inspection unless you're instructed to by your Inspector. 2/19/2021
Residential Foundation, Footing Inspection 2/19/2021
Residential Manufactured Home Setup Inspection 2/1/2021
Residential Footing, Deck or Porch inspection 2/5/2021
Residential Final Building Inspection 2/19/2021
Residential Certificate of Occupancy Approval Inspection 2/19/2021

Structure Use Occupancy Type Square Footage
STRINGER - Lot #22 Replace Manufactured Home


The conditions listed below are standard for all permits of this type and may not apply to your specific permit. Once your permit is issued, all conditions listed are applicable to your permit.

Permit Expiration: Building permits expire 365 days after permit issuance, or 180 days after the last approved inspection activity is performed. The Building Official may extend the time for action for a period not exceeding 180 days, upon the receipt of a written extension request indicating that circumstances beyond the control of the permit holder have prevented action from being taken. Additional fees may be due to reactivate the permit.
ELECTRICAL WORK. If electrical work is proposed, a separate electrical permit is required. You can contact Labor and Industries (L&I) at to obtain an electrical permit. Electrical systems must be inspected by L&I prior to requesting a framing inspection and final approval granted prior to requesting a final building inspection from the Department of Community Development.
Reinspection Fee: All approved plans for this permit and the printed building permit with conditions are required to be on-site for inspection purposes, and work to be inspected shall be complete and ready for inspection. If an inspection is called for and plans are not available on site, or the work is not ready for inspection, or if previously identified corrections have not been made, approval will not be granted. In addition, a re-inspection fee will be charged and must be collected by the Department of Community Development prior to any further inspections being performed or approvals granted.
Final Inspection Required: All building permits shall have a final inspection performed and approved by the Kitsap County Department of Community Development prior to permit expiration. The failure to request a final inspection or failure to obtain final approval prior to expiration will be documented in the legal property records on file with Kitsap County as being non-compliant with Kitsap County ordinances and building regulations and will be referred to Kitsap County Code Compliance for action.
Certificate of Occupancy Approval Inspection. No building or structure shall be used or occupied, until the final inspection and the occupancy approval inspection have been approved. Approval of the certificate of occupancy inspection shall not be construed as an approval of any violation of the provisions of this code or of other ordinances of the jurisdiction. Certificates presuming to give authority to violate or cancel the provisions of this code or other ordinances of the jurisdiction shall not be valid.
Manufactured Homes: All exterior doors require landings with stairs, guardrails, and handrails in accordance with the Kitsap County Building & Fire Code as adopted and amended in KCC Chapter 14.04. All landings and/or decks that exceed 40 square feet and exceed 30 inches in height from grade require separate permits. All such landings and/or decks shall be completed and finaled prior to this permit obtaining final approval.
Residential Address: Numerals for residential building addresses shall be conspicuously displayed on a contrasting background and shall be a minimum of 4 inches in height with a minimum stroke of 1/2 inch. If the building is not clearly visible from a named way of travel, the numerical designation (address) shall also be displayed near the main entrance to the property as well as at the driveway entrance that leads to the building. Property addresses shall be posted prior to requesting any inspections. If property addresses are not posted upon inspection, inspection will not be approved and a re-inspection fee will be charged and must be collected by the Department of Community Development prior to any further inspections being performed or approvals granted.
All structures shall have roof gutters. All gutters, downspouts, and yard drains must be directed at a minimum to splash blocks, (or an infiltration system, if required). Drains shall have a minimum 2% grade away from the foundation. All drainage discharges shall be located so that there is no adverse impact to downstream or adjacent properties.
This permit shall comply with all Kitsap Public Health District regulations and conditions of approval.
Prior to requesting a final inspection, the Vehicle Identification Number (VIN) for the mobile or manufactured home shall be provided to Kitsap County Department of Community Development. Please upload documentation showing the VIN in the Online Permit Center.

Required Permits
Type Requirement For Number Status
Demolition and/or Removal of Structure - Residential Close 20-03753 Finaled